Solid pneumatic tires are for use on dirt and gravel surfaces, or for "soft yard" applications. Solid pneumatic tires do not hold air and are therefore good for construction or job sites where there are a lot of sharp objects, otherwise known as "flat hazards."
How to Measure Pneumatic and Pneumatic Shaped Solid Tires
Measurements are given in the following order:
- A = Section Height (H)
- B = Inside Diameter (ID)
- C = Base (Rim) Width (W)
Measurements are in inches
(1 inch x 2.54 = centimeters)
Comments
0 comments
Article is closed for comments.